Medium frequency furnace deduster
|Terms of Trade:||FOB,CIF|
|Min. Order:||3000 Others|
|Delivery Time:||30 Days|
|Place of Origin:||Botou city, hebei province, China|
1. source of pollution: there are two kinds of iron furnace: one is a medium frequency furnace or a frequency furnace, which is heated by electric heating. The other is a relatively clean production; the other is a crucible, commonly known as the earth furnace, and the use of fuel - coke heating. The furnace produces a large amount of smoke and has been restricted to use. The exhaust gas produced by the iron smelting is mainly dust (smoke). It contains, PbO, ZnO, Cu, Pb, Zn, Sn and so on. The particle size is mostly below 0.5 m. An environmental monitoring station has monitored the unorganized dust emission of the iron furnace at the time of unharnessing, and the result of dust monitoring is up to 32.1 g/m3, while the current emission standard of the country is only 30 mg/m3, which is more than the discharge standard.
2. medium frequency furnace dust collector principle and characteristics when the dust gas through the filter bag, small gas molecules through the dust layer of the filter cloth gap, and large particles of dust are blocked through, due to gravity settlement, falling to the ash bucket. When the dust on the surface of the filter is continuously thickened, the resistance is increasing and the gap decreases continuously, the air flow is difficult to pass through, and the dust layer accumulates to a certain degree. Bag filter has the following characteristics: (1) high dust removal efficiency, dust removal efficiency up to 99.99%, dust concentration of only 10 mg/m3; 2. Strong adaptability, can deal with different types of particles, treatment capacity can be small; 3. When the operating elasticity is large, the dust concentration in the inlet gas has a large change, and the effect of dust removal efficiency is little; (4) structure simple Single, flexible use, easy to recycle dry materials, no sludge treatment.
3. the general process of dust removal process for intermediate frequency furnace is as follows:
1) iron furnace powder (smoke) dust
2) Dust Cover extraction of flue gas pipe settling chamber
3) cold air
4) bag dust remover for exhaust fan of chimney exhaust fan
4. factors affecting the dust removal effect of medium frequency furnace dust collector
(1) selection of filter bag: filter bag should choose material of wear-resistant and high temperature resistance, glass fiber cloth / felt, NOMEX, needle felt, P84 needle felt and so on. Considering the wear resistance of the filter bag, durable high temperature and cost and so on, the copper industry generally chooses the NOMEX needle felt. (2) temperature control: the temperature of the general NOMEX filter bag is 200 c, so the inlet temperature of the treatment facility should be controlled below 200 c. The temperature can be reduced to below 200 c when the flue gas after the long smoke pipe reaches the dust collector box. In special case, the water can be cooled and the cooler (3) is installed at the total pipe, and the fan is selected as the selection of the fan. The fan has better effect than the fan. (4) mechanical dust removal is more convenient and cleaner than manual dedusting, but the cost of mechanical dust removal is high. (5) air leakage and resistance: theoretically calculating the dust removal efficiency of the bag filter is 99.99%, but the actual measurement can not reach the effect of air leakage and resistance, the lower the air leakage rate, the better the effect of dust removal; the resistance has a certain effect on the dust removal effect, often clearing the filter bag, reducing the resistance, and can improve the dust removal effect. (6) dust cover should be as close to the furnace head as possible to make dust more easy to enter the cover, increase dust collection, reduce unorganized emission pollution (7) equipment maintenance: equipment and cloth bags should be repaired and replaced in a timely manner. (8) airflow speed: at 1~3 m/s airflow speed, the best dust removal effect is achieved, and the general wind speed is controlled at 2~4 m/s. (9) filter area: the larger the filter area, the higher the efficiency of dust removal, but the cost will be increased accordingly. Therefore, air volume should be calculated beforehand and then the corresponding type of dust collector should be selected. (10) two stage dust removal: a settling chamber is installed in front of the dust collector box to form a two stage dust removal. The settling chamber can remove part of the large particle dust, reduce the temperature and reduce the pressure of the dust collector.
Botou Youjian Environmental Protection Equipment Co. LTD.
Botou youjian environmental protection equipment co., LTD. is a professional company with the development, design, production, installation and service of environmental engineering and environmental protection equipment. Company is located in the coronal has the reputation of "hometown of pears" botou city, hebei province, the company in the east near the beijing-shanghai railway, beijing-shanghai high-speed and 104 national highway, 106 state road and west stone yellow high-speed, the geographical position is superior, the transportation is very convenient. Our company adheres to the tenet of quality first, users first, now reside in the domestic high grade, high quality, high performance, environmental protection equipment technology development and production base, production volume in the national top Xu in the industry. Main technical products are: cloth bag dust collector, single filter, cyclone, and electrostatic precipitator and wet dust collector, dust remover, the filter cartridge dust collector, injection machine and other kinds of environmental pollution control technology and equipment, dust bag, dust skeleton, electromagnetic pulse valve, discharge feeder and other accessories, products are widely used in metallurgy, electric power, building materials, Chemical Industry, etc. Company always adheres to the philosophy of science and technology innovation, work closely with scientific research units and the major design institute, has developed 30 many kinds of environmental protection technology and products, more than 20 projects to undertake all kinds of large-scale environmental engineering, the products sell well in more than 30 provinces and cities and exported to the United States, India, Vietnam and other countries and regions, has won the broad masses of users and design units. Among them, "pulse bag filter" and "high voltage electrostatic precipitator" were first approved by the provincial and national environmental protection bureau, and won the provincial and advanced environmental science and technology awards. We will take this as a new starting point and continue to work on the development and development of environmental engineering and environmental protection products. We will continue to maintain the advantages of high technology level, high quality of products and good reputation of enterprises. Establish the correct scientific outlook on development, constantly improve the overall quality of the company, enhance the market competitiveness, and push the company to a new level. In the development process, the company adheres to the combination of scientific research, design and production services, and takes the market with new mechanism, new thinking and new technology, and has achieved remarkable results. Company will continue to cooperate with the social from all walks of life ability, and sincerely hope friends from all walks of life will, as always support and concern the development of our company, for the development of the construction of a harmonious society, for the environmental protection enterprise strive brilliant tomorrow! Enterprise tenet: the lowest price but the best quality!
- Company Name: Botou Youjian Environmental Protection Equipment Co. LTD.
- Representative: douliangliang
- Product/Service: Dust Collecter , Industrial Dust Collector , Dust Collector Fittings , Cyclone Dust Collector , Desulfurization Collector , Filter Press
- Capital (Million US $): 1000000RMB
- Year Established: 2014
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Shiying industrial zone, botou city, hebei province, China
- Contact Person: Mr. Dou Liangliang
- Tel: 86-0317-5660622
Premium Related Products